Our Booth Designs at German Exhibitions

We are proud to present our latest set of designs and realizations at German Fairs / Exhibitions. These realizations were at the latest edition of the ACHEMA, a trade show held in Frankfurt, from the 18th to the 22nd of June 2012. This exhibition is held once in every three years.

In this exhibition we had a unique situation where we had five clients, but just three stands. One of the booths was a single client booth, but the other two had two co-exhibitors each. The first booth was for a Delhi based company, Axiva Sichem Biotech. They had a corner stand of 25sq.m. The design brief was to come up with a stand that would be simple, uncomplicated, uncluttered, highly functional and yet be pleasing to the eye and welcoming to potential buyers. This is what we came up with.

Booth Design and Realization at the ACHEMA 2012, Germany.

Display Unit Design for ACHEMA 2012, a German Fair.

The second stand that we designed was for the two exhibitors SD India Corporation and Contech Instruments Ltd. Both companies had together taken up a 12sq.m. booth, that was open on one side. This stand presented its own peculiar design problem, in that it had to be divided into two distinct areas, each dedicated to one exhibitor. Yet the design of the stand had to be uncluttered and economical. The design of the booth, hence, was conceived as a combination of the modular system and the wooden stand construction system. The results are below.

Booth Design at ACHEMA 2012 at Frankfurt

Exhibition Stall Design for a German Fair, the ACHEMA 2012 at Frankfurt

The third stall that we designed, was for the exhibitors United Scientific Instruments and Rajas Enterprises. Again a 12sq.m. stand, this was slightly less complicated because the two exhibitors did not require a very clear demarcation of space and hence the problem of overcrowding didnot crop up. Also since the display was mainly graphics on the walls, the stand looked pleasing and simple and very easy on the eye. The photos of the stand are posted below.

Exhibition Booth Design for ACHEMA 2012 at Frankfurt, Germany

Exhibition Stall Design for ACHEMA 2012 at Frankfurt, Germany

 We are now working on providing stand design and fabrication services to our clients at the Automechanika 2012 (Frankfurt), CPhI 2012 (Madrid) and Medica 2012 (Dusseldorf). If you are exhibiting at these fairs, or at any other fairs anywhere in India or Europe, please do get in touch with us and we will be more than happy to give you a no-obligations offer for your stand. We can be reached at studioonedpl@gmail.com

Exhibition Stand Design in Germany

As we wrap up our work at the ACHEMA in Frankfurt, and move towards other fairs in India and in Europe, we are proud to present some pictures of our work at the above fair. These are initial pictures of the time when our team was still working on the stands, just before completion and handover to the clients. As more pictures come in, I will post those too.

The first one is of the exhibition stand that we designed for SD India Corporation and Contech Instruments Ltd. These two firms were co-exhibitors at the fair in Frankfurt. They were looking for an economical solution for their booth at the ACHEMA Frankfurt fair, and we designed a stand that was a combination of a modular and a bespoke system. This made the stand look good, yet be functional and economical.

Stand Deign for ACHEMA at Frankfurt, Germany

Stand Design for ACHEMA at Frankfurt, Germany

Being a 12 sq.m. stand, open on only one side, and with two co-exhibitors, with their seperate meeting areas, made designing for it a difficult problem. The problem was as much to avoid congestion in the booth, as to keep costs low and yet make it look good. The solution was to use a combination of a modular system, and combine it with a custom-designed element, to act as both a partition between the two spaces and to double up as a display unit.

Designing a stand for an exhibition in Germany, has its own typical issues and problems. The designing of the stand is done in our office in India, but the fabrication has to take place in Germany. Obviously then, there has to be a lot of two way communication between our design team and the fabricating partner in Germany. And it has to be made sure that there is absolute clarity of thought and planning between the two, so that a perfect outcome can be planned. It is here that Studio One Designs Pvt. Ltd., scores over most of its competitors. We work hard, not only during the design process in India and the fabricating process in Germany, but also in between the two processes, to ensure that there are no unpleasant surprises, for us or for our clients!!

We look forward to hearing from you, for your design and display needs at any fair / exhibition, anywhere in India or in Europe, and we would very happy to help you get the right solution for your needs at the right price. We assure you of our best services always. Do get in touch with us!!